| タイトル | Thermal/Mechanical Durability of Polymer-Matrix Composites in Cryogenic Environments |
| 本文（外部サイト） | http://hdl.handle.net/2060/20040085787 |
| 著者（英） | Bandorawalla, Tozer; Gates, Thomas S.; Whitley, Karen S.; Grenoble, Ray W. |
| 著者所属（英） | NASA Langley Research Center |
| 発行日 | 2003-01-01 |
| 言語 | eng |
| 内容記述 | In order to increase the reliability of the next generation of space transportation systems, the mechanical behavior of polymeric-matrix composite (PMC) materials at cryogenic temperatures must be investigated. This paper presents experimental data on the residual mechanical properties of a carbon fiber polymeric composite, IM7/PETI-5 as a function of temperature and aging. Tension modulus and strength were measured at room temperature, -196 C, and -269 C on five different specimens ply lay-ups. Specimens were preconditioned with one set of coupons being isothermally aged for 576 hours at -184 C, in an unloaded state. Another set of corresponding coupons were mounted in constant strain fixtures such that a constant uniaxial strain was applied to the specimens for 576 hours at -184 C. A third set was mechanically cycled in tension at -184 C. The measured properties indicated that temperature, aging, and loading mode can all have significant influence on performance. Moreover, this influence is a strong function of laminate stacking sequence. Thermal-stress calculations based on lamination theory predicted that the transverse tensile ply stresses could be quite high for cryogenic test temperatures. Microscopic examination of the surface morphology showed evidence of degradation along the exposed edges of the material because of aging at cryogenic temperatures. ________________ |
| NASA分類 | Composite Materials |
| レポートNO | AIAA Paper 2003-7408 |
| 権利 | No Copyright |
| URI | https://repository.exst.jaxa.jp/dspace/handle/a-is/88802 |
|
