| タイトル | Corner Wrinkling at a Square Membrane Due to Symmetric Mechanical Loads |
| 本文（外部サイト） | http://hdl.handle.net/2060/20010106118 |
| 著者（英） | Dharamsi, Urmil K.; Blandino, Joseph R.; Johnston, John D.; Brodeur, Stephen J. |
| 著者所属（英） | NASA Goddard Space Flight Center |
| 発行日 | 2001-01-01 |
| 言語 | eng |
| 内容記述 | Thin-film membrane structures are under consideration for use in many future gossamer spacecraft systems. Examples include sunshields for large aperture telescopes, solar sails, and membrane optics. The development of capabilities for testing and analyzing pre-tensioned, thin film membrane structures is an important and challenging aspect of gossamer spacecraft technology development. This paper presents results from experimental and computational studies performed to characterize the wrinkling behavior of thin-fi[m membranes under mechanical loading. The test article is a 500 mm square membrane subjected to symmetric comer loads. Data is presented for loads ranging from 0.49 N to 4.91 N. The experimental results show that as the load increases the number of wrinkles increases, while the wrinkle amplitude decreases. The computational model uses a finite element implementation of Stein-Hedgepeth membrane wrinkling theory to predict the behavior of the membrane. Comparisons were made with experimental results for the wrinkle angle and wrinkled region. There was reasonably good agreement between the measured wrinkle angle and the predicted directions of the major principle stresses. The shape of the wrinkle region predicted by the finite element model matches that observed in the experiments; however, the size of the predicted region is smaller than that determined in the experiments. |
| NASA分類 | Instrumentation and Photography |
| 権利 | No Copyright |
| URI | https://repository.exst.jaxa.jp/dspace/handle/a-is/92398 |
