| タイトル | NOx Emissions from a Lobed Fuel Injector/Burner |
| 本文（外部サイト） | http://hdl.handle.net/2060/19980237448 |
| 著者（英） | Mitchell, M. G.; Smith, O. I.; Karagozian, A. R.; Smith, L. L. |
| 著者所属（英） | California Univ. |
| 発行日 | 1996-10-01
1996 |
| 言語 | eng |
| 内容記述 | The present experimental study examines the performance of a novel fuel injector/burner configuration with respect to reduction in nitrogen oxide NOx emissions. The lobed injector/burner is a device in which very rapid initial mixing of reactants can occur through strong streamwise vorticity generation, producing high fluid mechanical strain rates which can delay ignition and thus prevent the formation of stoichiometric diffusion flames. Further downstream of the rapid mixing region. this flowfield produces a reduced effective strain rate, thus allowing ignition to occur in a premixed mode, where it is possible for combustion to take place under locally lean conditions. potentially reducing NOx emissions from the burner. The present experiments compare NO/NO2/NOx emissions from a lobed fuel injector configuration with emissions from a straight fuel injector to determine the net effect of streamwise vorticity generation. Preliminary results show that the lobed injector geometry can produce lean premixed flame structures. while for comparable flow conditions, a straight fuel injector geometry produces much longer. sooting diffusion flames or slightly rich pre-mixed flames. NO measurements show that emissions from a lobed fuel injector/burner can be made significantly lower than from a straight fuel injector under comparable flow conditions. |
| NASA分類 | Environment Pollution |
| レポートNO | Paper-96F-075 |
| 権利 | No Copyright |
| URI | https://repository.exst.jaxa.jp/dspace/handle/a-is/97321 |
|
